When you’ve got mismatched spline counts holding up your work, this sleeve adapter is your quick fix. Whether you’re trying to connect an older implement with 10-spline input to a different shaft size, or you need to repair a driveline with worn splines, this little part bridges the gap so you can keep rolling instead of hunting for expensive new components.
What You’re Getting
- 1-inch inside diameter with 10-spline configuration for secure engagement
- 1-3/8-inch outside diameter provides compatibility with common agricultural equipment
- 2-1/2-inch length gives plenty of contact area for reliable power transfer
- Heat-treated steel construction handles the torque loads and shock that come with farm work
- Precision machining ensures smooth operation without binding or excessive play
Built for Real Farm Work
This adapter works in PTO systems, hydraulic pump drives, and implement drivelines where you need to connect 10-spline shafts to equipment expecting different sizing. It’s the type of repair part that saves the day when you’re dealing with older equipment, custom setups, or implements that don’t quite match your tractor’s standard connections.
Made to Last
Farm equipment takes a beating, and your power transmission components need to handle constant rotation, shock loads, and varying conditions. This sleeve is built with quality steel and proper heat treatment to resist wear and maintain its connection integrity season after season.
Good to Know
This is a direct replacement part – no modifications needed. Clean both spline surfaces thoroughly before assembly and apply a light coat of grease to prevent corrosion. The splines should slide together smoothly without force – if you have to hammer it on, something’s wrong and you risk damaging the precision surfaces.
