Nothing ruins a good day in the field faster than an engine that’s running rough or burning oil. A quality oil filter keeps your engine’s lifeblood clean by trapping metal particles, dirt, and combustion byproducts that would otherwise grind away at bearings, pistons, and other expensive internals. This 5.14-inch spin-on filter threads right on with standard 3/4-16 UN threads and gets you back to work without any fuss.
What You’re Getting
- Standard spin-on design that threads on easily with common tools
- Proper 5.14-inch length provides good filtration capacity for longer service intervals
- Quality filter media captures contaminants while maintaining steady oil flow
- 3/4-16 UN thread pitch fits a wide range of tractor applications
- Built to handle the temperature swings and vibration that come with farm work
Built for Real Farm Work
This filter works on tractors from multiple brands where engines need reliable filtration during long hours of operation. Whether you’re running a utility tractor for daily chores, pulling heavy implements during planting season, or pushing through harvest with extended hours, clean oil is what keeps everything running smooth and protects those costly engine components from premature wear.
Made to Last
Farm equipment filters need to handle dust, heat, cold, and constant vibration without failing. This filter uses quality construction and proper sealing to keep doing its job through temperature swings from winter starts to summer field work. The filter media is designed to trap particles while maintaining oil flow, so your engine stays protected without starving for lubrication.
Installation Notes
Hand-tighten the filter until the gasket contacts the mounting surface, then turn another 3/4 turn—no need to overtighten and risk damaging the gasket. Apply a thin film of clean oil to the gasket before installation to help it seal properly and make future removal easier. Always check your oil level after changing the filter and top off as needed.
