Please refer to the Images above; Product Specifications, Associate Part Chart and the Model Fit Guide below to Ensure a proper fit.
Part Number 117-7700 Supersedes to Part Number 161-2171
- PRODUCT NUMBER AND VARIATIONS: 161-2171, 161 2171, 1612171, 117-7700, 117 7700, 1177700
- PRODUCT TYPE: Replaceable Residential Rubber Rotor Blade
- SIZE: Length 18.500 in. – Width 6.200 in. – Height 0.400 in. – Weight 0.635 lbs.
- NOTES & DETAILS: Toro OEM 161-2171 IS COMMINLY USED – 161-2171 is Assembled to the Rotor Shaft Weldment Ears Using a Flanged Counter Sinking Screw – Toro 161-2171 Are Made with High Quality of Rubber Allowing for them To Run against a Hard Surface without Causing Damage to Pave or Cement Driveways as well as Helping Propel the Complete Snowblower Unit Forward when the Auger is Engaged. The Friction Design of 161-2171 Rubber Rotor Blades Also Allows for a Cleaner Snow Cleanup as well as Enhancing the Capability of Blowing wet Snow and Slush. If Your Blades are Not Cleaning Properly or Giving no Forward/Propelling Assistance it is time for a NEW! Set of Rubber Rotor Blades.
- COMMON SERIES APPLICATIONS: Toro Select 18″ Power Clear & Power Lite Snow Blower Models.
- MODEL FIT CHART:
SNOWBLOWER’S
POWER LITE Series – Model Numbers – (* Model Numbers 38273, 38274, 38283)
POWER CLEAR Series – Model Numbers – (* Model Numbers 38272, 38282, 38472, 38473, 38474, 38475)
- ASSOCIATED PARTS CHART:
ASSOCIATED PARTS REFERENCES FOR PART NUMBER 161-2171 ONLY
CLICK ON THE ASSOCIATED PART NUMBER TO BE REDIRECTED
COMPLETE KIT – ROTOR BLADES & HARDWARE
- 38266 – COMPLETE ROTOR BLADE & HARDWARE KIT (Fastens to the Rotor Shaft Comes as the Complete Hardware and Both Rotor Blades) x1 Per Snowblower
INDIVIDUAL PARTS
- 117-2315-03 – ROTOR SHAFT ASSEMBLY (Enables the Rubber Rotor Blades to Be Fastened to the Rotor Shaft Weldment Rotor Ears and Brackets that is Welded or Manufactured to the Main Rotor Shaft – it is Always recommended to Use the Correct Shoulder Counter Sinking Screws to Fasten the Rubber Rotor Blades to Protect Against Over-Tightening and Eliminating Damage to the Rubber Rotor Blades) x1 Per Snowblower
- 136-7182 – SHOULDER COUNTER SUNK SCREW (Retains the Rubber Rotor Blades to the Rotor Shaft Weldment Rotor Ears and Brackets that is Welded or Manufactured to the Main Rotor Shaft – Protects Against Over-Tightening and Eliminates Deforming and Causing Damage to the Rubber Rotor Blades) x6 Per Rubber Rotor Blade – 12 for Complete Rotor Shaft Assembly and Components
- 3296-56 – LOCK NUT (Retains 136-7182 Screw and their Components) x6 Per Rubber Rotor Blade – 12 for Complete Rotor Shaft Assembly and Components
